HOMCOM 821-035V90 Instructions Manual page 6

Humidity Level & Timer 2 digit display
Push Button Functions
A. Power Push Button
B. Adjustable Humidity Push Button
C. Timer Push Button
D. Fan Speed Push Button
OPERATING INSTRUCTIONS
1. The Power indication light will turn on in green when the unit is plugged in,
regardless of whether the unit is operating or not.
2. Press button once to start operation. Press it again to stop operation.
3.press button as follows：
Press to set the desired fan speed. It can be adjusted between high speed and low
speed.
4. Press button to set the desired humidity level in the room, which can be
set from 40% to 80% at 5% intervals.
After a period of working, when environment humidity is lower than the selected
humidity by 2%, compressor will stop and fan stops working 3 minutes later; When
environment humidity is equal to or higher than the selected humidity by 2%,
compressor will restart once 3-minute compressor protection time over.
5.press button can be timer setting：
Press the button to program the time when the unit turns on and turns off. If you
want to cancel the timer programming, press the button to adjust the time at 00, and
press the button ,it will be circulate from 00-01-02......23-24.It is the programmed
time to switch the machine. The programmed time will be cancelled when to switch
compressor manually each time. The programmed time remains unchanged if the
machine stops to wok due to water full or during defrosting
DRAINING THE COLLECTED WATER
When the drainage tank is full, the tank full indicator light will turn on, the operation
will stop automatically and the buzzer will beep 15 times to alert the user, that the
water need to be emptied from the drainage tank .
5