Figure 8 Series Of Restart Messages - Quantum Scalar i40 Maintenance Manual

Chapter 1: Common Service Procedures
Shutting Down, Restarting, Turning Off, and Removing Power
Figure 8 Series of Restart
Messages
18
Web Client
1 Make sure the connected host applications are not sending
commands to the library and that all library operations have
stopped.
2 Press Operations > System Shutdown.
3 Select Restart and click Apply.
4 Press OK to confirm.
5 Several messages appear on the operator panel, in the order shown
in Figure 8 on page 18. Do not do anything in response to these
messages. The library will restart and initialize on its own.
Quantum Scalar i40 and Scalar i80 Maintenance Guide