WaterLogic WL2000IT Manual page 17

5. Place a pitcher, catch basin or other container under the faucet of the WL2000IT Water
Treatment System.
6. Flush the Hot Tank until water runs clear. Ensure you pinch the hot water over flow tube to
drain and clear the sub tank.
7. Once clear Water dispenses from the faucet the Hot Tank has been descaled. Always ensure the
WL2000IT Water Treatment System is performing to the customer's satisfaction.
WARNING! HOT WATER. The WL2000IT Water Treatment System produces Hot Water up
to 87°C (189°F). Water above 52°C (125°F) can cause severe burns or scalding. Hot water
should be dispensed carefully into insulated container to avoid injury.
WARNING! REINSTALL ALL PANELS AND COVERS. Always reinstall all Panels, Protective
covers, and fasteners after servicing equipment. Failure to do so could result in severe
personal injury and will void the certifications and warranty of the equipment.
WL2000IT Manual Page 17 - Revision:EU-2020-10-13