Replacing The Bag - iRobot Roomba Combo 2 Essential Owner's Manual

Replacing the bag

1
Lift up on the canister lid to open.
EN
2
Pull up on the card to remove the bag from the
canister.
3
Install a new bag by sliding the card into the
guide rails. This will seal the bag so that dust and
debris cannot escape.
20 For more information, visit global.irobot.com
4
Press down on the lid, making sure that it is
completely closed.
IMPORTANT: To achieve optimal
performance with your robot and dock,
clean and/or replace your robot's
filter as needed.
Removing debris from the blower cover
Inspect the blower cover for any lint or debris build-up
and wipe with a clean, dry cloth to remove.