Replacing The Bag - iRobot Roomba Combo j5+ Owner's Manual

Care and Maintenance Instructions for Your Clean
Base
To keep your dirt disposal running at peak performance, follow these
care procedures:
EN
Part
Bags
Charging Contacts
Visual Docking Target
Blower Cover inside
canister
Note: iRobot manufactures various replacement parts and assemblies. If
you think you need a replacement part, please contact iRobot Customer
Care for more information.
10 For more information, visit global.irobot.com
Care frequency Replacement frequency
- Bags should be replaced
when prompted by the
LED indicator/app.
Once every month
Once every month
(remove debris from
blower cover)

Replacing the Bag

1
Lift up on the canister lid to
open.
-
-
2
Pull up on the plastic card
to remove the bag from the
canister.
Note:
so dust and debris cannot
escape.
3
Discard the used bag.
4
Install a new bag, sliding the
plastic card into the guide rails.
5
Press down on the lid making
sure that it is completely closed.
Note: To achieve optimal
performance with your robot
and automatic dirt disposal,
clean and/or replace your
robot's filter as needed.
This will seal the bag