iRobot Roomba Combo 2 Essential Owner's Manual page 14

Vacuuming
1
Empty the robot tank.
2
Detach the mopping pad plate and mopping pad
3
Place your robot on the floor and press the CLEAN button.
Vacuuming and mopping
Your robot is able to both vacuum and mop at the same time when the mopping
pad plate and mopping pad are installed.
Before starting a vacuum and mop job, prepare the room by rolling up/removing any
carpets in the area you want to mop.
IMPORTANT: Do not add liquids such as hot water, detergent or
disinfectant as these could damage the robot.
After completing your mopping and vacuum cleaning job, make sure
that you empty the water tank and replace the mopping pad.
1
Press the bin release buttons to remove the bin.
Roomba Combo® 2 Essential robot + AutoEmpty™ dock Owner's Guide
EN
13