Button Controls; Cleaning Pattern; Spot Clean; Do Not Disturb Mode - iRobot Roomba Combo 2 Essential Owner's Manual
Robot + autoempty dock
Hide thumbs
Also See for Roomba Combo 2 Essential:
- Quick start and safety manual (44 pages) ,
- Quick start manual (80 pages)
Advertisement
Cleaning
Button controls
EN
1
Home button: Tap to send the robot home
2
CLEAN button: Tap to Start/Pause/Resume a job
Hold for 2–5 seconds to end a job
3
Spot Clean Button: Tap to spot clean a designated area
12
For more information, visit global.irobot.com
Cleaning pattern
Your robot will automatically explore and clean your home in neat rows. It will return
to the dock at the end of a cleaning job and whenever it needs to recharge.
Remove excess clutter from floors before cleaning. Use your robot
frequently to maintain well-conditioned floors.
After 90 minutes of inactivity off the dock, the robot will automatically end its
cleaning job. If you are unsure if the robot has finished or paused, visit the iRobot
Home App to check on its status.
Spot clean
Tap
to spot clean a designated area. The robot will spiral outwards about 1
metre (3 feet) and then spiral inwards to end where it started. Please remove any
obstacles from the spot clean path. After spot cleaning has been completed, the
robot will end the job. To send the robot back to its dock, tap
Do Not Disturb mode
In Do Not Disturb mode, the robot vacuum does not perform scheduled cleaning,
and the power icon light indicator turns off after one minute of charging. Do Not
Disturb mode can be enabled or disabled in the app.
.
Advertisement
Need help?
Do you have a question about the Roomba Combo 2 Essential and is the answer not in the manual?
Questions and answers
i don't use computers or smart phones, how do you start it manually??