Disable Vlan Management; Mac Access - Avaya AP-8 User Manual

!
CAUTION:
Once a VLAN Management ID is configured and is equivalent to one of
the VLAN User IDs on the AP, all members of that User VLAN will have
management access to the AP. Be careful to restrict VLAN membership
to those with legitimate access to the AP.
1. Click Configure > VLAN.
2. Set the VLAN Management ID to use the same VLAN ID as one
of the configured SSID/VLAN pairs. See
Management Configurations
3. Place a check mark in the Enable VLAN Protocol box.

Disable VLAN Management

1. Click Configure > VLAN.
2. Remove the check mark from the Enable VLAN Protocol box (to
disable all VLAN functionality) or set the VLAN Management ID to
0 (to disable VLAN Management only).

MAC Access

The MAC Access tab allows you to build a list of stations, identified by
their MAC addresses, authorized to access the network through the AP.
The list is stored inside each AP within your network. Note that you must
reboot the AP for any changes to the MAC Access Control Table to take
effect.
Avaya Wireless AP-8 User's Guide
SSID, VLAN, and Security Modes
Typical VLAN
for details.
4-139