Change Passwords; Set Network Names For The Wireless Interface - Avaya AP-8 User Manual

Change Passwords

[Device-Name]> passwd <Old Password> <New Password> <Confirm
Password> (CLI password)
[Device-Name]> set httppasswd <New Password> (HTTP interface
password)
[Device-Name]> set snmprpasswd <New Password> (SNMP read
password)
[Device-Name]> set snmprwpasswd <New Password> (SNMP read/write)
[Device-Name]> set snmpv3authpasswd <New Password> (SNMPv3
authentication password)
[Device-Name]> set snmpv3privpasswd <New Password> (SNMPv3
privacy password)
[Device-Name]> reboot 0
!
CAUTION:
Avaya strongly urges you to change the default passwords to restrict
access to your network devices to authorized personnel. If you lose or for-
get your password settings, you can always perform the
Default Procedure.

Set Network Names for the Wireless Interface

[Device-Name]> set wif <index 3> netname <Network Name (SSID)
[Device-Name]> show wif
Avaya Wireless AP-8 User's Guide
for wireless interface>
Set Basic Configuration Parameters
Reset to Factory
A-39