Enable Wep Encryption; Enable 802.1X Security - Avaya AP-8 User Manual

Avaya ap-8 access point: user guide

Hide thumbs Also See for AP-8:

Table of Contents

SSID, VLAN, and Security Modes

Enable WEP Encryption

Follow these steps to set up WEP encryption on an SSID/VLAN pair:

1. Set Security Mode to WEP (if necessary).

2. Enter Encryption Key 0 only; the transmit key (the key used to

encrypt outgoing data) will automatically be set to zero. Keep in

mind the following:

— For 64-bit encryption, an encryption key is 10 hexadecimal

characters (0-9 and A-F) or 5 ASCII characters (see

— For 128-bit encryption, an encryption key is 26 hexadecimal

characters or 13 ASCII characters.

— For 152-bit encryption, an encryption key is 32 hexadecimal

characters or 16 ASCII characters.

Follow these steps to enable 802.1x on an SSID/VLAN pair:

1. Set Security Mode to 802.1x.

2. Select an Encryption Key Length. The AP-8 supports 64-bit or

128-bit encryption for 802.1x security mode.

Avaya Wireless AP-8 User's Guide