Alarms; Editing Tcp/Udp Port Filters - Avaya AP-8 User Manual

Avaya ap-8 access point: user guide

Hide thumbs Also See for AP-8:

Table of Contents

1. Click Edit under the TCP/UDP Port Filter Table heading.

2. Make any changes to the Protocol Name or Port Number for a

specific entry, if necessary.

3. In the row that defines the port, set the Status to Enable, Disable,

or Delete, as appropriate.

4. Select OK

Alarms

This category has three sub-categories.

Alarm Host Table

Avaya Wireless AP-8 User's Guide