Configure The Ap As A Dhcp Server - Avaya AP-8 User Manual

Avaya ap-8 access point: user guide

Hide thumbs Also See for AP-8:

Table of Contents

Other Network Settings

Configure the AP as a DHCP Server

You must have at least one entry in the DHCP Server IP Address

Pool Table before you can set the DHCP Server Status to Enable.

[Device-Name]> set dhcpstatus disable

[Device-Name]> set dhcpippooltbl 0 startipaddr <start ip

[Device-Name]> set dhcpgw <gateway ip address>

[Device-Name]> set dhcppridnsipaddr <primary dns ip address>

[Device-Name]> set dhcpsecdnsipaddr <secondary dns ip address>

[Device-Name]> set dhcpstatus enable

[Device-Name]> reboot 0

Before enabling this feature, confirm that the IP address pools you have

configured are valid addresses on the network and do not overlap the

addresses assigned by any other DHCP server on the network. Enabling

this feature with incorrect address pools will cause problems on your net-

address> endipaddr <end ip address>

Avaya Wireless AP-8 User's Guide