Other Parameters; Iapp Parameters - Avaya AP-8 User Manual

Parameter Tables

Other Parameters

IAPP Parameters

Name
IAPP
IAPP Status
Periodic Announce
Interval (seconds)
Announce
Response Time
Handover Time-out Integer
Max. Handover
Retransmissions
Send Announce
Request on Startup
NOTE:
These parameters configure the Inter Access Point Protocol (IAPP)
for roaming. Leave these settings at their default value unless a
technical representative asks you to change them.
A-116
Type Values
Group N/A
Integer enable (default)
disable
Integer 80
120 (default)
160
200
Integer 2 seconds
410 ms
512 ms (default)
614 ms
717 ms
819 ms
Integer 1 - 4 (default 4)
Integer enable (default)
disable
Access CLI Parameter
R iapp
RW iappstatus
RW iappannint
R iappannresp
RW iapphandtout
RW iapphandretx
RW iappannreqstart
Avaya Wireless AP-8 User's Guide