Extreme Networks Extreme Management Center ExtremeControl IA-A-25 Installation Manual page 16

10 In the Set Time Zone screen, select the appropriate time zone and press [Enter].
=================================================================
Set Time Zone
=================================================================
You will now be asked to enter the time zone information for this system. Available
time zones are stored in files in the
/usr/share/zoneinfo directory.
Please select from one of the following example time zones:
1. US Eastern
2. US Central
3. US Mountain
4. US Pacific
5. Other - Shows a graphical list
=================================================================
Enter selection [1]:
11 In the Current Engine Configuration screen, review the current settings and press [Enter] to
continue.
Access Control Engine Configuration:
Host Info:
Gateway/Name Server/Domain:
Alternate Name Server:
SNMP User/Auth/Privacy:
Netsight Server IP:
Press [enter] to continue:
12 In the Engine Network Configuration Complete screen, you can accept the current configuration or
modify the settings.
=================================================================
Access Control Engine Network Configuration Complete
=================================================================
Configuration of the Access Control Engine network settings is now complete.
Enter 0 or any key other than a valid selection to continue.
If you need to make a change, enter the appropriate number from
the choices listed below.
=================================================================
0. Accept the current settings
1. Edit Access Control Engine settings
2. Edit SNMP settings
3. Edit date and time
4. Modify all settings
=================================================================
Enter selection [0]:
When you see the following screen, configuration is complete.
=================================================================
Extreme Networks - Access Control Engine - Setup Complete
=================================================================
Setup of the Access Control is now complete. Details of the engine setup process are
located in the log files in the /var/log/install directory.
=================================================================
You are now ready to use Management Center to manage your engine.
ExtremeControl IA-A-25 Installation Guide for version 8.1
nacappliance 10.50.76.100/255.255.255.0
10.50.76.1/1.2.3.4/extremenetworks.com
1.2.3.4
snmpuser/snmpauthcred/snmpprivcred
1.3.4.5
Configuration
16