Table of Contents
Advertisement
Quick Links
MODEL 1036-215
SMALL ANIMAL
NECROPSY TABLE
CAUTION
Inspect unit and all components
for any loosening that may have
occurred during shipping
ATTENTION
Review entire manual before
starting assembly
ATTENTION
All images and Drawing in this manual
may not represent your model.
Refer to your particular project for
exact specifications
Mortech™ Manufacturing Inc.
411 North Aerojet Avenue, Azusa, CA 91702
(626) 334-1471 www.mortechmfg.com
Installation and Operating Instructions
CAUTION
DO NOT USE CLEANERS
CONTAINING CHLORINE WHEN
CLEANING STAINLESS STEEL
WARNING
Biohazard Label is placed on the
equipment signifying potential
infectiousness due to the samples
or reagents
CAUTION
ALL EQUIPMENT IS EXTREMELY HEAVY
TAKE PRECAUTION AND THE NECESSARY
STEPS TO PREVENT INJURY
Technical Users' Manual
ISO Doc. #2005 (REV D)
MARCH 2018
Advertisement
Table of Contents
Related Manuals for MORTECH 1036-215
Summary of Contents for MORTECH 1036-215
- Page 1 Technical Users’ Manual Installation and Operating Instructions MODEL 1036-215 SMALL ANIMAL NECROPSY TABLE CAUTION CAUTION Inspect unit and all components DO NOT USE CLEANERS for any loosening that may have CONTAINING CHLORINE WHEN occurred during shipping CLEANING STAINLESS STEEL ATTENTION...
-
Page 2: Safety Information
• Is unit draining properly? WARNING • Are all nuts, bolts, and pins secured in place? It is crucial that any work performed on Mortech If unit has an issue contact Mortech Manufacturing Inc. Manufacturing Inc. manufactured items are carried out... -
Page 3: Installation Instructions
Step 1. Verify all utility rough- ins and project specifications that have been supplied for your location. Drawings from Mortech for utilities are provided with the submittal packet A 4"x4" AREA FOR ELECTRICAL INPUT A 6" DUCT FOR EXHAUST CONNECTION information. - Page 4 Plumbing 1036-215 Small Animal Necropsy Table REDUCED PRESSURE ASSEMBLY WATTS 009 REDUCED PRESSURE ASSEMBLY Located underneath the unit. PLUMBING CONNECTION INSTRUCTIONS Step 2: Connect drain line to sink basin or disposal unit, STEP 1: (Refer to Figure-G) Flush out all water lines depending on the option provided.
-
Page 5: Plumbing Connection
Electrical 1036-215 Small Animal Necropsy Table PLUMBING CONNECTION COLD WATER ELECTRICAL CONDUIT CONNECT TO BUILDING DRAIN HOT WATER GREEN (GROUND) FROM DISPOSAL FROM GFCI ELECTRICAL CONNECTION INSTRUCTIONS Step 1: (Refer to Figure-I) Connect electrical lines from station to building. Units are provided with watertight conduit lines for connection. -
Page 6: Parts Listing
- If above two are adequate, disassemble unit and check for - Check for debris in sink area debris causing a clog in the unit. - Contact plumber to diagnose and clear - Call Mortech customer service if problem persists drain if problem persist Disposal not functioning Rust developing... -
Page 7: Optional Accessories
Parts listing Parts listing 1036-215 Small Animal Necropsy Table STANDARD DESIGN FEATURES: • Full Length, perforated supports • Rapid and positive drainage Standard Design Features • Access panel door Width: ............30 in./76 cm. • Spray hose assembly w/cold water Length: ..........60 in./152 cm. - Page 8 1036-215 Small Animal Necropsy Table Accessories ECONOMY GRADE SCALE Emergency Eyewash OR DIGITAL PLATFORM Hose Assembly Hand control spray to provide a gentle SCALE (2 Kg) Compact scales are lightweight, of water to rinse eyes of foreign debris. portable and perfectly suited for...
- Page 9 Component Data Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
- Page 10 Std. 1013; AWWA Std. C511; CSA B64.4. Shall be a Watts Regulator Co. Series 009. †Does not indicate approval status. Refer to Page 2 for approved 1 Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
-
Page 11: Operation
CAUTION: Solenoid must be fully reassembled as the hous- ing and internal parts are part of and complete the magnetic circuit. Place insulating washer at each end of coil if required. Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com... -
Page 12: Product Features
120/277 Volt HP Rating: 1HP-120V 2HP-240V-277V Max Amp: 16 Amp Termination: Side Actuator Material: Thermoplastic Body Material: Thermoplastic Strap Material: Steel Standards and Certifications: UL/CSA 110V 220V Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com... -
Page 13: Technical Specifications
Markings The outer surface of the conduit shall be clearly marked with a legible print legend in accordance with UL 1660 and CSA C22.2 No. 227.2. Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com... - Page 14 RESET LINE LINE LINE LINE: cable brings power to the GFCI Service Panel Mortech™ Manufacturing Inc. Grounding connection to box ( if box has a grounding terminal) LOAD LOAD 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com Wire...
- Page 15 • Patented Quick-Fit™ Key Hole Mount for Easy Installation • Patented Universal-Fit™ Adapter Technology • Lockable Tab • Premium Powdercoat Finish • Spring Hinge Closure • UL Listed & 2008 NEC Compliant Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
- Page 16 HOT/COLD MIXING FAUCET Model #133X T&S DECK MOUNT FAUCET w/GOOSENECK NOZZLE Model #B-0225-LN T&S Model #B-0413 T&S Model #B-0413 T&S DECK MOUNT FAUCET w/WRIST BLADES Model #B-0225-LN Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
- Page 17 8 - HANDLE + 8-32 SET SCREW Diverter Handle 9 - LOCKING RING 10 - GLAND NUT 11 - GRAPHITE PACKING Control Valve 12 - 0-RING Model #CP45 13 - VALVE Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
-
Page 18: Vacuum Breaker
*Performance as established by an independent testing laboratory. Dimensions – Weights MODE SIZE (DN DIMENSION WEIGHT 3 ⁄4HT 1 1 ⁄2 1 3 ⁄8 113.4 Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 Dimensions – Weights (626) 334-1471 www.mortechmfg.com... -
Page 19: Warranty
PART NO. DESCRIPTION 420-010 SCREW 633-223 INDEX BUTTON (WHITE) MODEL 45-CP 633PL 4-ARM PLAIN HANDLE ASSEMBLY 1-214 217XTLH SLO-COMPRESSION UNIT (LH) ------- VALVE BODY (NOT SOLD SEPARATELY) Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com... - Page 20 SPRAY HOSE ASSEMBLY SINGLE WALL CONTROL VALVE Model #2700 SPRAY HEAD Model #10820 SPRAY HANDLE Model #2913 SPRAY HOSE Mortech Model #SH10 SPRAY HOSE Mortech Model #SH10 FISHER SINGLE WALL CONTROL VALVE MODEL # 2700 Feature: • Single wall • Stem - right hand •...
- Page 21 Component Data END RINSE ASSEMBLY T & S BRASS AND BRONZE WORKS, INC. MODEL # B-1025 End rinse assembly control valve (Figure-A) (Figure-A) MODEL # B-1025 Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
-
Page 22: Maintenance Instructions
Stainless steel equipment maintenance MAINTENANCE INSTRUCTIONS had time to oxidize or decompose. The preferred solvent is one that does not contain chlorine, such as acetone, methyl The unit requires regular maintenance and follow the alcohol, and mineral spirits. manufactures directions. EFFECTIVE CLEANING METHODS DISINFECTING AND CLEANING Commercial Cleaners - Many commercial cleaners... -
Page 23: Maintenance Record
Maintenance record MAINTENANCE RECORD Date... -
Page 24: Training Record
Training record TRAINING RECORD Date... - Page 25 PARTS AND SERVICE Information in this Manual is subject to change without notice Customer relations and product support are important and does not represent a commitment on the part of Mortech aspects of Mortech Manufacturing. Inc. Manufacturing. Inc. Mortech Manufacturing. Inc. assumes...
Need help?
Do you have a question about the 1036-215 and is the answer not in the manual?
Questions and answers