IMPORTANT SAFETY PRECAUTIONS WARNING: Before starting any exercise program, consult with your physician or health professional, especially the person who is above 35 years old people or has some health problems before. We take no responsibility for any troubles or hurts due to above reasons. Don't power on until you finish assembly the treadmill and covering the protected top of motor.
16. The treadmill maximum user weight is 110KG 17. Please do not overuse the treadmill so can avoid any injury and do not use incorrect way for your safety. 18. When the treadmill is not being used, please keep the safety pull pin in the safety place to avoid others use. The main technical parameters Input supply voltage:240V Working temperature: 0-40 ℃...
Assembly instruction WHEN YOU OPEN THE CARTON, YOU WILL FIND THE BELOW SPARE PARTS: 1 Main frame 1set D17 Inner washer 8PCS D13 Round hex bolt C13 Safety key 1set M8*15 4PCS D3 Allen wrench 5MM 1 PC B18 Silicon oil 1 PC D1 Screw driver 1PC D11 Round hex bolt M8*45 4 PCS...
Page 6
STEP 2: According to the picture to tighten the bolt M8*45(D16), M8*15(D13)and inner washer(D17). Then Locked with M8*15(D13) and inner washer (D17). Step 4: Attach the front cover L(B11L)&R(B11R) to the base frame with bolt ST4.2*19 (D48). B11R B11L...
Page 7
Step 5: Put on the Safety key (C13),MP3 line (C19) and put on the bottle(B49). ATTENTION: Must confirm complete assembly as the required above and lock all bolts. Do the following operations after checking everything is OK. Before you use the treadmill, please read the instructions carefully.
Folding instruction Lift up the machine and force to pull up until you heard "click" that made by safety casing stuck the pneumatic cylinder. Unfolding instruction Push the safety sleeve with your foot lightly and pull down the machine at the same time as the arrow direction.
Grounding Methods This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Operation Guide WINDOW DISPLAY 1.1. 1.2. START Normal start after 5 seconds countdown 1.3 PROGRAM 1 manual mode,12 pre-set programs, 1 body fat program, 3 countdown function, 3 USER. 1.4. SAFETY LOCK FUNCTION The window shows"---" when take away the safety lock and the treadmill will stop quickly with "didi" alarm noise.
Page 11
1.5.2 “PROGRAM” BUTTON When the treadmill is not running, press this button can circle choose from manual mode to pre- set mode P1-P12 and body fat. 1.5.3 “MODE” BUTTON When the treadmill is not running, press this button to choose countdown modes:”H-1”,”H-2”,”H-3”;:H-1”...
Page 12
1.6.6 PULSE Display pulse data 1.6.7 ALL WINDOW DISPLAY DATA RANGE TIME:0:00 – 99.59(MIN) DISTANCE:0.00 – 99.9(KM) CALORIES: 0.0 – 999 (C) SPEED: 0.8-14.0(km/h) PULSE:50 – 200 (BPM) INCLINE:0 – 12 1.7 PULSE FUNCTION When the treadmill is running, hold the hand pulse about 5 seconds, it will display pulse data. The pulse data range is 50-200 times/ minute.
Page 13
INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE 1.9 Manual model operation 1.9.1 Press start key, time count down 3 seconds, then treadmill will start to work with initial speed 0.8km/h 1.9.2 Press speed +/-, you can adjust the speed ▲/▼...
Page 14
Sex 01 Male 02 Female Age 10------99 Height 100----200 Weight 20-----150 FAT ≤19 Under weight FAT = (20---25) Normal weight FAT = (25---29) Over weight FAT ≥30 Obesity 1.12 User Program Besides 12 pre-set programs, there have 3 user-defined programs: U1, U2 and U3 Each user program has 10 segments.
Getting started guide PREPARE f you are around 35 years old, or have health problem, even this is your first time to do fitness exercise, please consult doctor or professional before use it. Before do exercise, please stand on the side to learn how to operate, such as start, stop and speed adjustment. After that stand on the plastic deck of the treadmill board, catch hold of the handrail, start by 1.6--3.2 km/h low speed, stand straight, look forward, one foot try to do few times, then stand on the belt to do exercise.
SAFETY EXERCISE Please consult professional staff before do exercise. He can help recommendation exercise rate/ intension and time according to your age and health condition. When running, if you feel chest tightness or chest pain, irregular Heartbeats, short of breath, dizziness or other unwell, please stop immediately! And consult professional before you want continually to do exercise.
Warm-up Exercise It is better to do some warm-up exercise. Warm the muscle easy stretch, so use 5-10 mins to warm-up. Then stop and according below method to do stretch exercise for five times, and each foot do 10 seconds or more every time. After running, do those stretch exercises again.
Maintenance Instruction WARNING:Please make sure pull out the treadmill's power plug before cleaning or maintaining the product. CLEANSING:General cleaning or the unit will greatly prolong the treadmill's life. Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on either side of the walking belt and also the side rails.
Belt Adjustment Place treadmill on a level surface. Make treadmill run at approximately 6-8 km/h, observe the running belt deviate condition. f the belt has drifted to the right, unplug the safety lock and power switch, and turn the right adjusting bolt 1/4 turn clockwise, then insert the power switch and safety lock, make the treadmill running, observe the running belt deviate condition.
Parts list A Welding Parts Description Description Incline bracket Main frame Filter bracket Base frame Motor base Left upright bracket Belt guide Right upright bracket Handrail bracket B Plastic Parts Description Description Side rail Console chip set B16L B1-1 Overlay Left rear cover Membrane key B16R...
Page 22
C Electrical parts Description Description DC motor Safety key Running belt Speed sensor Rear roller Power line Front roller Console upper wire Running board Console lower wire Cylinder MP3 Line Motor belt Magnetic ring Power switch Inductance Controller Filter Handle pulse left keyboard Single line Handle pulse right keyboard speed sensor...
Page 23
Cross head self taping bolt Nylon Nut M8 ST4.2X16 Cross head self taping bolt Flat washer M10 ST4.2X45 Cross head self taping bolt Flat washer M8 ST4.2X25 Spring washer M5 Cross bolt M6X20 Spring washer M8...
Error code and significance Error Code Fault Description Solutions 1. Check if computer is connected to controller with correct wires, check Failure communication connector, check if wire is damaged, or unplug and re-connect between controller and 2. . Change inverter and test computer 3.
Page 25
BODYWORX BODYWORX Model No: SPORT1250 To register your warranty, please go to www.gpisports.com.au...
Need help?
Do you have a question about the SPORT1250 and is the answer not in the manual?
Questions and answers