Related Manuals for Bodyworx JI2040
Summary of Contents for Bodyworx JI2040
- Page 1 Motorised BODYWORX BODY WORX Treadmill Model No: JI2040 Retain this owner’s manual for future reference Read and follow all instructions in this owner’s manual Version A...
-
Page 2: Table Of Contents
TABLE OF CONTENTS OVERVIEW DRAWING ASSEMBLY STEPS SAFETY INSTRUCTIONS CAUTION GROUNDING INSTRUCTIONS MAINTENANCE PRE-ASSEMBLY CHECK LIST COMPUTER OPERATION INSTRUCTION OVERVIEW DRAWING... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using this product, basic precautions should always be followed, including the following: Please read the instructions carefully before starting to use this product. DANGER – To reduce the risk of electric shock: 1. Always unplug this product from the electrical outlet immediately after using and before cleaning the treadmill. -
Page 4: Grounding Instructions
GROUNDING INSTRUCTIONS This product must be grounded first. If malfunction or breakdown occurs, grounding will provide a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. -
Page 5: Pre-Assembly Check List
PRE-ASSEMBLY CHECK LIST ITEM Description ITEM Description Frame Truss Hex Screw: M8xP1.25x60 Bottle Truss Hex Screw: M8xP1.25x25 Handrail Cover L-shaped Hex Wrench + Screwdriver 5mm Decoration Cover-Left Hex Wrench 6mm Decoration Cover-Right Safety Key Power Cord Chest transmitter SILICON MP3 Sound Cable Truss Philips Screw: M5xP0.8x18 Washer Truss Philips Screw: M5xP0.8x10... -
Page 6: Assembly Steps
ASSEMBLY STEPS Two persons are required to finish the assembly steps. (Caution!! Please follow exactly the assembly steps below to avoid injury.) 1. Put up the two computer handrail tubes of Frame (A) as shown in the drawing on the right and tighten with Hex screw (a). - Page 7 3. After tightening the left and right uprights, wedge the left and right decoration covers (D, E) onto the frame and tighten with Philips Screw (h). 4. Insert cup holder (F) onto the corresponding positions as shown in the right drawing.
-
Page 8: Caution
CAUTION Note: The cylinder contains high pressure gas. Please avoid crashing or colliding with other objects in order to prevent dangers from occurring. Note: If the Cylinder is hit, it might be damaged and hinder normal usage. The treadmill may collapse while in its folded position. - Page 9 This treadmill has a foldable mechanism for storage. Stop all movements (including stopping the running belt and taking off the power cord from the power outlet) before storage; then fold the main frame in the same direction as shown in the right picture. Be sure the fixing plate inserts the tube of base frame.
-
Page 10: Maintenance
MAINTENANCE 1. If the belt tends to move off the centre, stop the treadmill. Take the L-shaped Wrench and adjust the Hex Screw in the Rear End Cap. For example, if the running belt is moving towards the left side, tighten the left Hex Screw about 1/4 turn (clockwise);... -
Page 11: Computer Operation Instruction
SILICON SERVICING CHART KM / MILE SPEED SERVICE INTERVAL 6 KM/HR Below 1 Year 6 ~ 12 KM / HR 6 Months 12 KM / HR Above 3 Months 4 Mile / HR Below 1 Year 4 ~ 8 Mile / HR 6 Months 8 Mile / HR Above 3 Months... -
Page 12: Manual Mode
Weight Setting Mode ➢ Display for one second after power is on and enter into the weight setting mode (Calories Calculation use). Press SPEED +/- : Set weight: 23~130 Press ENTER : Confirm weight value and enter into start / ready mode. ... -
Page 13: Program Mode
➢ CALORIES MODE Preset is Calories Press SPEED + / - : User can adjust target calories ( Calories ~ Calories ). Press START : Countdown 3 seconds and get into the sport mode (all values count upward). ... - Page 14 ➢ SPORT MODE Press SPEED + / - : Set speed. Press INCLINE +/- : Set incline. Press STOP / RESET : Stop running. In the meantime the matrix display will show “STOP”, pushing “ENTER” to check the situation of sport or push “START” to return to the sport mode.
- Page 15 ➢ Sport Mode Press START : Count down for 3 seconds and enter into sport mode. Press SPEED +/- : Set speed. Press INCLINE +/- : Set incline. Press STOP / RESET : Stop running. In the meantime the matrix display will show “STOP”, ...
-
Page 16: Cool Down Mode
Press 0 / 2 / 4 / 6 / 8 / 10 : Setting the incline LEVEL 0 / 2 / 4 / 6 / 8 / 10. After minutes, it begins to detect heartbeat change speed. Detect once every seconds. - Page 17 Window. Level has F1 ~ F6, F1 is the best ~ F6 is the worst F1 : > 24 F2 : 20 ~ 24 F3 : 15 ~ 19 F4 : 10 ~ 14 F5 : 05 ~ 09 F6 : 00 ~ 04 OTHER FUNCTION INSTRUCTIONS ➢...
- Page 18 Original Countdown Setting Countdown Display Range Original Value Setting TIME (min : sec) 0:00 30:00 5:00 ~ 99.00 0:00 ~ 99:59 SPEED (km / h) 1.0 ~ 10.0 mil / hr DISTANCE (km) 0.00 1.0 ~ 99.00 0.0 ~ 99.9 CALORIES (calories) 40 ~ 999 0 ~ 999...
- Page 19 Incline...
- Page 20 BODYWORX BODYWORX Model No: JI2040 To register your warranty, please go to www.gpisports.com.au...
Need help?
Do you have a question about the JI2040 and is the answer not in the manual?
Questions and answers