Subscribe to Our Youtube Channel
Related Manuals for Bodyworx JI1825
Summary of Contents for Bodyworx JI1825
- Page 1 Motorised BODYWORX BODY WORX Treadmill Model No: JI1825 Retain this owner’s manual for future reference Read and follow all instructions in this owner’s manual Version A...
-
Page 2: Table Of Contents
TABLE OF CONTENTS OVERVIEW DRAWING ASSEMBLY STEPS SAFETY INSTRUCTIONS CAUTION GROUNDING INSTRUCTIONS MAINTENANCE PRE-ASSEMBLY CHECK LIST COMPUTER OPERATION INSTRUCTION OVERVIEW DRAWING... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using this product, basic precautions should always be followed, including the following: Please read the instructions carefully before starting to use this product. DANGER – To reduce the risk of electric shock: 1. Always unplug this product from the electrical outlet immediately after using and before cleaning the treadmill. -
Page 4: Grounding Instructions
GROUNDING INSTRUCTIONS This product must be grounded first. If malfunction or breakdown occurs, grounding will provide a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. -
Page 5: Pre-Assembly Check List
PRE-ASSEMBLY CHECK LIST ITEM Description ITEM Description Frame Truss Hex Screw: M8xP1.25x40 Decoration Cover - Left Truss Hex Screw: M8xP1.25x15 Decoration Cover - Right Round Head Philips Screw M5 x P0.8 x 15 Handrail Cover - Left Hex Wrench + Screwdriver: 5mm Handrail Cover - Right SILICON Cup Holder... -
Page 6: Assembly Steps
ASSEMBLY STEPS WARNING: Don't untie the loincloth until assembly is finished. If you until the loincloth first, it may cause dangerous consequences. Two persons are required to finish the assembly steps. (Caution!! Please follow exactly the assembly steps below to avoid any injury.) 1. - Page 7 2. Put up Upright (L & R) as shown in the right drawing and tighten with Hex Screws (a & b). P.S. To avoid unexpected accidents or injuries, always assemble the treadmill with more than two workers, do not assemble by yourself. 3.
- Page 8 4. Wedge cup holder (F) onto the corresponding positions as shown in the right drawing. 5. Wedge the left and right handrail covers (D & E) onto the corresponding positions as shown in the right drawing and tighten with Truss Philips Screw (g) and washer (h).
-
Page 9: Caution
CAUTION This treadmill has a foldable mechanism for storage. Stop all the movements (including stopping the running belt and remove the power cord) before storage; then fold the main frame as the direction shown in the right picture. Be sure you hear a “click” sound. -
Page 10: Maintenance
MAINTENANCE 1. If the belt tends to move off the centre, stop the treadmill. Take the L-shaped Wrench and adjust the Hex Screw in the Rear End Cap. For example, if the running belt is moving towards the left side, tighten the left Hex Screw about 1/4 turn (clockwise);... -
Page 11: Computer Operation Instruction
SILICON SERVICING CHART KM / MILE SPEED SERVICE INTERVAL 6 KM / HR Below 1 Year 6 ~ 12 KM / HR 6 Months 12 KM / HR Above 3 Months MILE 4 Mile / HR Below 1 Year 4 ~ 8 Mile / HR 6 Months 8 Mile / HR Above 3 Months... -
Page 12: General Operation
General Operation: ➢ Turn on the treadmill. ➢ Put the safety key in the recess of the console. The beeper will sound. At this time, all windows will display the values. The preset values are 0, not blinking which means the treadmill has entered start / ready status. Under this status, the user can hold the grip pulse sensor to detect heart rate values directly. - Page 13 ➢ Press to start treadmill, the treadmill will start with a speed of 1.0 km / hr, at this time press keys to increase / decrease speed (also can press fast speed buttons to instantly choose the speed you need), press once to stop your workout ( press one time, all values stop changing.
- Page 14 1.3 At this time, you can press to set the distance. After finishing, press to start running, or press to go back to the options in the Mode pattern. Pre-set value : 5 km Range of distance : 1 ~ 9.9 km, Step is 0.1 km. PROGRAM : This mode includes 6 patterns, P1 ~ P6, user can choose the pattern you like ...
- Page 15 ● Height : Pre-set is 170 cm, range : 130 ~ 200 cm, Step is 1 cm, press adjust, after choosing the correct value then press , into the next value setting. ● Sex : Pre-set value is 1 (Male), press to switch 1 (Male), 0 (Female), to select the correct option, press to enter the next value setting.
- Page 16 Annex 1...
- Page 17 Annex 2...
- Page 18 Annex 3...
- Page 19 Annex 4...
- Page 20 Annex 5...
- Page 21 Annex 6...
- Page 22 BODYWORX BODYWORX Model No: JI1825 To register your warranty, please go to www.gpisports.com.au...
Need help?
Do you have a question about the JI1825 and is the answer not in the manual?
Questions and answers