Autonomous SmartDesk One Assembly Instructions Manual page 2

Warning
Make sure that children, pets, etc... are away from the product while it is in
operation. When not using the product for a long time or there is lightning, please
unplug the power supply.
Ensure that the desktop does not touch the wall.
Ensure that the product is free of any obstacles during operation. There should be
no obstacles higher than 500mm under the desktop.
The working environment temperature is 0-40 °C, and make sure the product is
kept far away from corrosive gases, liquids and dusty objects.
To prevent the product from malfunctioning and electronic parts causing harm to
the human body, it is strictly prohibited to disassemble the product without
permission.
Although the product has anti-collision and other functions, in order to avoid
unnecessary harm to human body. Make sure your hands and other parts of your
body are in a safe position. During manual reset, this function does not will be
activated.
Please read the relevant assembly instructions carefully before using this product.
Our company does not assume any responsibility for product damage or human
injury caused by abnormal operation.
After initial use or power failure, manual reset is required before performing
related operations.
1