3.1.2.4. FOLLOWING ERROR display mode
The axis following error is displayed, as well as the programme number, the block number, the
status of the G, M, T, S and F functions, as well as PLC messages, if any, comments and the
meaning of the function keys, are also displayed.
3.1.2.5. ARITHMETIC PARAMETERS display mode.
If the [PARAMETERS] function key is pressed, on the upper part of the screen a list of
parameters will appear with their corresponding value at that moment. By pressing either of
the keys
and
For example:
P46 = -1724.9281
P47 = -.10842021 E2
E-2 means ten to the power of minus two.
8025/8030 CNC OPERATING MANUAL
the remaining parameters will appear with their values.
15