Entering The Array Configuration Utility - American Megatrends StorTrends 3100 User Manual

Entering the Array Configuration Utility

For the StorTrends® 3100 Storage Appliance, you must configure the hard disk drives
via the Array Configuration Utility prior to installing the StorTrends® iTX Software.
Step Description
1 Power on your StorTrends® 3100 storage appliance. As soon as it is powered on, it will rapidly
go through POST. In a couple of seconds you will see the prompt for entering the RAIDCore
BC4852 Controller BIOS.
RAIDCore BC4852 Controller BIOS
Copyright (c) 2003-2005, Broadcom Corporation
Press <CTRL-R> to Configure. /
Press the <CTRL>+<R> key combination to enter the Array Configuration Utility. If done
successfully, you will see, "Configuration request detected. Entering configuration after
initialization."
RAIDCore BC4852 Controller BIOS
Copyright (c) 2003-2005, Broadcom Corporation
Configuration request detected. Entering configuration after initialization.
60 StorTrends® 3100 User's Guide