Personality - Robe Anolis ArcPower Unit Pixel Rack Mount Manual

7.3 Personality

Display Intensity - Use the menu to adjust the display intensity (1-min., 10- max).
Default Settings --- The menu item sets fixture parameters to the default (factory) values.
Note: All user settings will be lost except changes in the menu "Save Init Position" (menu Personality) and
changes in the menu "Edit Program" ( menu Stand alone).
Screen saver --- Use this menu item to switch OFF/ON the screen saver and to set time period (30 sec.-600
sec.) after that the display will be turned off. If the option Off is selected, the screen will permanetly light.
Lock screen --- Use the menu item to lock the screen.
Set Unlock code --- The menu item allows to enter password in order to prevent unauthorized person from
changing setting of the fixture. This code is required after switching the fixture on and after waking from screen
saver.
Disable Unlock code --- The menu item disables "Unlock code" function.
Emergency Trig --- The menu item allows to set an action, which will be performed after pressing the emer-
gency button (the button connected to the trigger input).
OFF - state of LED modules is without change.
ON - all fixtures full - if the function is on, all LEDs in pixels modules will light.
ON - all fixtures off - if the function is on, all LEDs in pixels modules will be turned off.
Date/Time --- The menu item allows you to set a current date and time. The date and time is saved in the
ArcPower Unit Pixel by one of the following ways:
1. Into the control display of the ArcPower Unit Pixel if the Real Time Zone (RTC) is not installed.
In case that the ArcPower Unit Pixel has been disconnected from mains and after a lapse of time is connected
to mains, both date and time run from values before disconnecting mains. You have to set the date and time
again to keep them current.
2. Into the Real Time Zone (RTC) if the zone is installed.
In case that the ArcPower Unit Pixel has been disconnected from mains and after a lapse of time is connected
to mains, both date and time run without interruption and still keep current values due to a battery of the Real
Time Zone.
A presence of the Real Time Zone in the ArcPower Unit Pixel is indicated by the Battery line on the screen.
Battery line
Real Time Zone information.
Accuracy of the Real Time Zone is typically +/-5 seconds per year. The battery should be replaced when a yellow
field is displayed on the battery line. Disconnect the ArcPower Unit Pixel from mains before changing the battery.
After connecting ArcPower Unit Pixel to mains, a self-test of battery is performed and than every 24 hours.
After changing the battery, set the date and time again.
Battery state
Battery charged
Low battery
(should be replaceded)
Flat battery
21