Windows Me - AL Tech Mediagate MG-35 Manual

1.3.2 Windows ME

1) After connecting mg-35 and plug power cable.
Windows itself will install driver automatically. And
then, check the driver installation at Windows [Start >
Settings > Control Panel > (view all Control Panel
options) > System > Device Manager > Universal
Serial Bus controllers > USB Mass Storage Device]
2) Check 'My Computer' or 'Explorer', there should be
a new volume. You can copy any data to this volume.
If a new volume is not be appeared, check HDD format
or not, and HDD file system. Windows ME only detect
FAT32 file system.
3) After copying data, remove MG-35 with using
remove icon at Windows right-down corner. If
you don't follow this procedure, data and MG-35 may
have damage.
15