Access Pc Via Network; Connect Lan Cable; Set Network Configurations - AL Tech Mediagate MG-35 Manual

2. Access PC via Network

2.1 Connect LAN Cable

When connecting Computer to MG-35 directly
Connect LAN cable to LAN port between MG-35
and PC. In this case, you have to use Cross LAN
cable type generally.
[TIP] If the computer's LAN card was connected
to Internet line, you can mount additional LAN
card to your PC and connect that additional LAN
card to MG-35.

2.2 Set Network Configurations

After connecting LAN cable, you have to set network configurations of Computer and MG-35.
You need to share a folder on Windows computer and use same 'IP Address range' and same 'Subnet Mask ' between
Windows computer and MG-35. For example,
IP Address
Subnet Mask
*It is possible to assign IP address and Subnet Mask of MG-35 as dynamic or static.
Computer
192.168.1.2
255.255.255.0
When connecting with IP Router or Hub
Connect LAN cable to LAN port between IP
Router or Hub.
In this case, you have to use Direct LAN Cable
type generally.
MG-35
192.168.1.3
255.255.255.0
18