Before You Begin - 3Com 3CNJ100 Installation Manual

Installation Guide

Before You Begin

Before you begin installation, register your product at:
www.3com.com/productreg.
The Network Jack is available in single- and 20-packs. Before you
begin the installation, make sure you have the following items,
which are included with the Network Jack:
6x32 screws (2 per Network Jack) for mounting the
I
Network Jack to the wall or office cubicle.
RJ-45 coupler cable (1 per Network Jack) for connecting
I
the Ethernet cable from the network to the Network Jack
(required only if your network cable is terminated with a
female RJ-45 connector).
Installation guide (1 per package).
I
Additionally, the following items are shipped with the single pack:
Adapter plates for installing connectors to use as pass-
I
through ports. The adapter plates accommodate connectors
from suppliers including:
Panduit (RJ-45 and RJ-11)
I
Avaya (RJ-45 and RJ-11)
I
NOTE: The connectors for the adapter plates must be
purchased from the manufacturer. For a list of supported
connectors, go to www.3com.com/.
Adapter plate screws (2) for mounting the adapter plate to
I
the Network Jack.
6