Table of Contents
Advertisement
20
SETPOINT OPEN ACCESS, RESET PIN NUMBERS
7
SETPOINT OPEN ACCESS
OPEN ACCESS IS CONFIGURED INDIVIDUALLY FOR EACH SETPOINT (SEE 6.2G). IF NONE
OF THE SETPOINTS HAVE OPEN ACCESS ENABLED, THIS FEATURE WILL BE DISABLED AND
THE
BUTTON WILL NOT RESPOND TO A SHORT BUTTON PRESS.
A
Begin by pressing the
enabled setpoint will appear on the display and toggle with the current value for
that setpoint. Using the
P
to accept the new value and progress to the next access-enabled setpoint.
B
If any other setpoints have the direct access option enabled then the same process
is repeated for the next setpoint. Pressing
exit and return to the operational display.
8
RESET PIN NUMBERS
IF YOU HAVE FORGOTTEN YOUR PIN NUMBER(S), FOLLOW THE PROCEDURE BELOW TO
RESET BOTH THE CALIBRATION AND SETPOINT SETUP PIN NUMBERS TO THEIR FACTORY
DEFAULT OF 1.
A
Press
,
execute and you may need several tries to get it right.)
B
When successful, a factory identification text will scroll across the display, followed
by: _ _ _ ALL PIN NUMBERS RESET TO 1.
C
Reset the default PIN numbers if required by following the instructions in 5.8 (for
input setup and calibration) and 6.3 (for setpoint setup), entering '1' whenever
you are prompted for your current PIN.
TEX-BAR-MAN-11V04 (SEP11)
button for half a second. The name of the first access-
and
and
P
at the same time. (This key combination can be difficult to
buttons, adjust the selected value. Then press
for the last enabled setpoint will
P
Copyright © 2011
Advertisement
Table of Contents
Need help?
Do you have a question about the TEX-BAR and is the answer not in the manual?