Displaying Module
Information
Use the
show module
module and submodule that is installed in a specific slot or to display
information for all modules and submodules that are installed in the
chassis.
The following
show module
show module <slot.subslot>
show module all
show module all verbose
The subslot number is always 1.
Basic Information For One Module
To display basic information for a module installed in a specific slot, use
the following command syntax:
show module <slot.subslot>
Where
<slot.subslot>
following example displays basic information for the EME installed in
slot 17, subslot 1 in a 16-slot chassis:
CB9000> show module 17.1
Slot
Module
-----
------
17.01
3CB9EME
Basic Information For All Modules
To display basic information for all installed modules, use the
command.
module all
Detailed Information For All Modules
To display detailed information about all of the modules that are installed
in your chassis, including information about module software and DIP
switch settings, use the
Displaying Operating Conditions
commands to display status information for a
commands are available:
is the location of the module in the chassis. The
Status
Description
------
--------------------------------
Active
Enterprise Management Controller
show module all verbose
127
show
command.