Modem Port Access; Access Levels - 3Com 4007 Implementation Manual

46 C 1: C
HAPTER ONFIGURATION

Modem Port Access

Access Levels

O
VERVIEW
You can access the management interfaces from your PC or Macintosh
using an external modem attached to the modem serial port. The system
transmits characters that you have entered as output on the modem port.
The system echoes characters that it receives as input on the modem port
to the current Administration Console session. The console appears to be
directly connected to the external modem.
For more information about modem configuration options, see the
chapters in Part I of this guide.
The Management Module CLI and the Administration Console CLI
support three access levels so that you can provide different levels of
access for a range of users, as described in Table 4.
You configure access levels and passwords on the Management Module
because that is the first point of entry. These conditions apply to both the
Management Module CLI and the Administration Console CLI of
switching modules. For example, if a user logs in to the Management
Module with Write privileges, then the user connects to any module's
Administration Console at the same level.
Table 4 Access Levels
Access
Level For Users Who Need to
Administer Perform system setup and
management tasks (usually a
single network administrator)
Write Perform active network
management
Read Only view system parameters
Only one user at a time can log in with Administer privileges.
For additional information about user login functions, see the chapters in
Part I of this guide.
Allows Users to
Perform system-level administration
(such as setting passwords, loading
new software, and so on)
Configure network parameters
(such as setting bridge aging time)
Access only display menu items
(display, summary, detail)