Path Assignment - 3Com 4007 Implementation Manual

308 C 15: P
HAPTER ACKET

Path Assignment

F
ILTERING
After you create a packet filter, you can assign it to any combination of
the
transmit all
, and
multicast receive internal
executes a series of operations on the packet's contents and, if the result
is 0, it stops (filters) the packet. If the result is not 0, the filter allows the
packet to pass.
The packet processing paths are defined in Table 61.
Table 61 Packet Processing Paths
Path
Transmit all (txA)
Transmit multicast
(txM)
Receive all (rxA)
Receive multicast (rxM) All multicast (including broadcast) frames that are received
Receive Internal (rxI)
,
transmit multicast
paths of each port. The filter
Description
All frames that are transmitted to the segment that is
connected to the port
All multicast (including broadcast) frames that are
transmitted to the segment connected to the port
All frames that are received by the port from the segment
that is connected to the port
by the port from the segment that is connected to the port
All frames received by the port that have a system internal
destination, such as ping and Telnet packets.
, ,
receive all receive