Graphic Settings; Image Color Management Settings - HP LaserJet 2605, 2605dn, 2605dtn Reference

number (9999) when the down arrow is used. When you click another group box or leave the
Advanced tab, invalid entries into the edit box (such as non-numerical input, numbers less than 1, or
numbers greater than 9999) change to the last valid value that appeared in the box. The default number
of copies is 1.
Because you can set the number of copies you want from some software programs, conflicts can arise
between the software program you are using and the driver. In most cases, the software program and
the driver communicate, so that the number of copies set in one location (such as the program) will
appear in the other (such as the driver). For some programs, this communication does not happen, and
the copies values are treated independently. For these programs, setting 10 copies in the program and
then setting 10 copies in the driver will result in 100 copies (10 x 10) being printed. It is recommended
that you set the number of copies in the program, wherever possible.

Graphic settings

The Graphic settings contain the following controls.
●

Image Color Management settings

● TrueType Font settings
Image Color Management settings
This control lists the available Image Color Management (ICM) options used for printing color graphics.
ICM, a set of calculations for color matching, makes it possible for programs to adjust colors before
printing so that the color of images displayed on the screen more closely match the color of images
when printed. The following options are available:
● ICM Method. The ICM Method setting specifies how to print your color graphics. The default setting
for ICM Method is ICM Disabled. The drop-down menu beside this setting contains the following
options:
●
ICM Handled by Host System. Click this option if you want the calculations for color matching
to be performed on the host computer before it sends the document to the printer
●
ICM Handled by Printer. Click this option if you want the calculations for color matching to
be performed on your printer. In this case, a set of rules for mapping the colors will be created
and downloaded to the printer (which must be Postscript language level 2 or higher). The
printer will use these rules to adjust colors in the document.
●
ICM Intent. The ICM Intent setting specifies how color images are created to produce the best-
looking image on the printed page.
●
If you are printing a chart or using fully saturated, bright colors, click Graphics to achieve the
best quality.
● For photographs or pictures where the colors blend together, click Pictures to maximize the
contrast.
●
If your document uses a color that you need to match exactly, and you are sending the
document to a printer that has that specific color of ink, click Proof.
●
If you want to preview the color settings from another printer, click Match.
ENWW Advanced tab features 135