Flip Pages Up; Booklet Printing - HP LaserJet 2605, 2605dn, 2605dtn Reference

NOTE
up with the bottom edge of the page feeding first. Load pre-printed forms and letterhead into
tray 2 or optional tray 3 face-down with the top edge at the back of the tray.
Loading pre-printed forms and letterhead is different than loading for 1-sided printing.

Flip Pages Up

The Flip Pages Up check box, enabled only when Print on Both Sides (Manually) is selected, is used
to specify the duplex-binding option. The following table shows the results of selecting this box,
depending upon the paper orientation selected on the Basics tab.
Table 6-2 Page orientation
Orientation (Basics tab)
Portrait
Landscape
When Print on Both Sides or Print on Both Sides (Manually) is selected, the document preview image
changes to show a spiral binding along either the left or the top edge of the page. In addition, a folded-
over corner appears in the lower-right portion of the preview image, indicating that printing will occur on
the back side. An arrow on the folded-over corner points in the direction that the pages would be flipped
if they were bound together.

Booklet Printing

The Booklet Printing drop-down menu is available when Print on Both Sides is selected and a
supported media size is selected in the Size is: drop-down menu on the Paper tab. The Booklet
Printing drop-down menu offers choices that are based on the current media size. The default setting
is Off. The other settings have the following format, where [paper size] depends on the media size that
is set on the Paper tab.
●
[paper size] (Left Binding)
● [paper size] (Right Binding)
When you select [paper size] (Left Binding) or [paper size] (Right Binding), the document preview
image changes to show the location of the binding. If you change the Pages per Sheet setting manually
to 4, 6, 9, or 16 pages per sheet, the booklet setting is disabled. See the
this document for more information.
The Booklet Printing drop-down menu is available only when the following conditions exist:
● Print on Both Sides (Manually) (on the Finishing tab) is selected.
●
% of Normal Size (on the Effects tab) is 100.
● Pages per Sheet (on the Finishing tab) is 1.
●
Size is (on the Paper tab) is set to Letter, Legal, or A4.
If any of these conditions is not met (except the first), a Bubble Help appears next to Booklet
Printing to tell you why it is disabled.
194 Chapter 6 Windows HP Traditional PCL 6 Driver features
When using 2-sided printing, load pre-printed forms and letterhead into tray 1 face
Flip Pages Up selected
Short-edge binding
Long-edge binding
Flip Pages Up not selected
Long-edge binding
Short-edge binding
Pages per Sheet section of
ENWW