Paper And Envelope Icons; Dynamic Measurement Units; Close; Table 6-6 Custom Media Sizes - HP LaserJet 2605, 2605dn, 2605dtn Reference

Table 6-6 Custom media sizes
Tray
Tray 1 (single sheet priority
input slot)
Tray 2 (250-sheet)
Tray 3 (250-sheet optional
tray)

Paper and envelope icons

The paper and envelope icons visually define width and height.

Dynamic measurement units

Use the dynamic measurement-units button to toggle the unit of measurement between standard
(inches) and metric (millimeters) units of measurement. The label on this button is dynamic, depending
on the measurement units that are in use. If the custom size currently shows the measurements in
inches, the button is labeled Use Millimeters. If the custom size currently shows the measurements in
millimeters, the button is labeled Use Inches. Click the button to switch measurement-unit types.

Close

The Close button closes the Custom Paper Size dialog box according to the logic in the following table.
In all cases, any custom media sizes that are successfully saved (and not renamed or deleted) while
the dialog box is open will remain in the Size is: drop-down menu on the Paper tab. The following table
lists options that appear when you click the Close button.
Table 6-7 Close dialog box text strings
If the drop-down menu contains
Untitled
<user-typed text>
<name of saved item>
<user-typed text>
218 Chapter 6 Windows HP Traditional PCL 6 Driver features
Dimensions Minimum
Width 76 mm (3 inches)
Height 127 mm (5 inches)
Width 76 mm (3 inches)
Height 127 mm (5 inches)
Width 76 mm (3 inches)
Height 127 mm (5 inches)
And the button says
Save
Save
Delete
Rename
Maximum
216 mm (8.5 inches)
356 mm (14 inches)
216 mm (8.5 inches)
356 mm (14 inches)
216 mm (8.5 inches)
356 mm (14 inches)
Then this happens when the Close
button is clicked
The dialog box closes, but you lose the
changes that were not saved.
The current media size remains the
same as it was when the Custom button
was clicked.
The dialog box closes, but you lose the
changes that were not saved.
The current media size remains the
same as it was when the Custom button
was clicked.
The dialog box closes, and the current
media size is set to the size that was last
shown in the drop-down menu.
The dialog box closes, but you lose the
changes that were not saved.
ENWW