D Transmitting An Mdc Radio Check Call; D Transmitting An Mdc Stun Call - Icom iF7010 Series Operating Manual

8
MDC 1200 SYSTEM OPERATION
Transmitting a call (Continued)

D Transmitting an MDC Radio Check call

An MDC Radio Check call enables the user to
determine whether the target station is turned ON,
within the communication range and on the channel,
without requiring any action from the target station
user.
(Menu > Signaling/Call > Call Menu > Radio Check)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select "Signaling/Call,"
then push [OK].
3. Push [Up] or [Down] to select "Call Menu," then
push [OK].
4. Select "Radio Check," then push [OK].
5. Select a station ID, then push [PTT] to transmit an
MDC Radio Check call.
• "Success" is displayed after receiving an
acknowledgment from the target station.
• "Failed" is displayed if the target station does not send
back an acknowledgment.
TIP: Push [Call Menu] to directly display the "Call
Menu" screen in step 4 above.

D Transmitting an MDC Stun call

An MDC Stun call remotely disables the transceiver.
(Menu > Signaling/Call > Call Menu > Stun)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select "Signaling/Call,"
then push [OK].
3. Push [Up] or [Down] to select "Call Menu," then
push [OK].
4. Select "Stun," then push [OK].
5. Select a station ID, then push [PTT] to transmit an
MDC Stun call.
• "Success" is displayed after receiving an
acknowledgment from the target station.
• "Failed" is displayed if the target station does not send
back an acknowledgment.
TIP: Push [Call Menu] to directly display the "Call
Menu" screen that is described in step 4 above.
8-5