Setting Or Clearing A Scan Tag - Icom iF7010 Series Operating Manual

5
SCAN OPERATION

Setting or clearing a Scan tag

You can set or clear a Scan tag to or from a channel in
a Scan list.
The Scan tag channel is a target channel during a
Scan.
<Key operation>
In a current Scan list:
1. Select a channel. (p. 3-4)
2. Push [Scan Add/Del (Tag)] to set or clear a Scan
tag to or from the channel.
• " " is displayed for a Scan tag channel.
When setting a Scan tag:
When clearing a Scan tag:
In a selected Scan list:
1. Select a channel. (p. 3-4)
2. Hold down [Scan Add/Del (Tag)] for 1 second to
display the "Scan tag" screen.
3. Push [Up] or [Down] to select a Scan list.
4. Push [OK] to set or clear a Scan tag to or from the
channel.
When setting a Scan tag:
When clearing a Scan tag:
5. Hold down [Back] for 1 second to return to the
standby screen.
5-5