Icom iF7010 Series Operating Manual page 139

13
OTHERS
Displaying the transceiver's fi rmware information
You can display the transceiver fi rmware's information.
<Menu operation>
( Menu > Information > Firmware Info)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select "Information," then
push [OK].
3. Push [Up] or [Down] to select "Firmware Info,"
then push [OK].
4. Push [Up] or [Down] to display the transceiver's
firmware information.
5. Hold down [Back] for 1 second to return to the
standby screen.
<Key operation>
1. Turn OFF the transceiver.
2. While holding down [P1] and [OK], turn ON the
transceiver.
• The transceiver enters the Firmware Information
mode, and "Firm Info" is displayed on the Key Display
area.
3. Push [P1] to display the "Firmware Info" screen.
4. Push [Up] or [Down] to display the transceiver's
firmware information.
5. Turn OFF the transceiver, then turn it ON again to
exit the Firmware Information mode.
13-2