D Receiving An Mdc Stun Call Or Revive Call; D Receiving An Mdc Selective Call (Selcall); D Receiving An Mdc Emergency Call - Icom iF7010 Series Operating Manual

8
MDC 1200 SYSTEM OPERATION
Receiving a call (Continued)
D Receiving an MDC Stun call or Revive
call
If an MDC Stun call is received that matches your
station ID, the transceiver will display the
"SORRY" and you cannot receive nor
(example: )
transmit.
To use the transceiver again, do the following.
 Receive an MDC Revive call that matches your
station ID.
 Enter the password.
 Setup again using the CS-F7500.

D Receiving an MDC Selective Call (SelCall)

When an MDC SelCall is received:
• Beeps sound. Beeps sound.
• " " is displayed.
• " " blinks.
• The calling station's ID is displayed.
Hold down [PTT] to speak.

D Receiving an MDC Emergency call

When an MDC Emergency call is received:
• Beeps sound.
• Portable type transceivers may vibrate.*
preset text
• The calling station's ID and "Emergency" is displayed.
 The transceiver automatically may transmit an
acknowledgment to the calling station, depending
on the setting.
1. Hold down [PTT] to speak.
2. To stop the beep and display indication, do the
following.
 Turn OFF the transceiver
 Change the channel
 Push a key
* Depending on the presetting.
8-8