Onkyo TX-NR3010 Instruction Manual page 60

Music Optimizer
■
Music Optimizer
Off
On
The Music Optimizer function enhances the sound quality
of compressed music files. When set to "On", the M.Opt
indicator lights on the AV receiver's display.
Note
• The Music Optimizer function only works with PCM digital
audio input signals with a sampling rate below 48 kHz and analog
audio input signals.
• The Music Optimizer is disabled when the Direct or Pure Audio
listening mode is selected.
• The setting is stored individually for each input selector.
• When "Sound Program" is enabled, the setting must be made
with "Sound Program Edit" (➔ page 75).
Re-EQ
With the Re-EQ function, you can compensate a
soundtrack whose high-frequency content is too harsh,
making it more suitable for home theater viewing.
■
Re-EQ
Off
On
This function can be used with the following listening
modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
Multichannel, DTS, DTS-HD High Resolution Audio,
DTS-HD Master Audio, DTS Express, DSD, Dolby EX,
Dolby Pro Logic IIz Height, Dolby PLIIx Movie, DTS
Neo:X Cinema.
■
Re-EQ(THX)
Off
On
This function can be used with the following listening
modes: THX Cinema, THX Surround EX, and
THX Ultra2 Cinema.
Note
• These settings are stored individually for each input selector. In
THX listening mode however, the setting will return to "On"
when the AV receiver is turned off.
• These settings cannot be used while a pair of headphones is
connected.
En-60
Advanced Operations
Screen Centered Dialog
By using the front high speaker, this function moves the
center image of dialogs etc. upwards, so that the image of
dialogs is fixed to the display height.
■
Screen Centered Dialog
As the value increases, the center image moves upwards.
0
1 to 5:
Screen Centered Dialog on.
Note
• The "Screen Centered Dialog" can be used when a compatible
listening mode is selected.
• This setting cannot be used while a pair of headphones is
connected.