Onkyo TX-NR3010 Instruction Manual page 47

n .
/
,
m +
*1
*
}
v
*2
*1 After enabling the corresponding speakers, press RECEIVER
followed by SP (speaker layout) repeatedly to select the
speakers you want to use: surround back and front
high,surround back and front wide, or front high and front
wide.
*2 This layout is only available when the external power amplifier
is connected to FRONT WIDE PRE OUT of the AV receiver
and the "11ch Playback" setting is set to "Yes"
66).
En-47
(➔ page 14,
Turning On & Basic Operations