Page 1
*1 Level and distance can be set individually for each output. If you use one subwoofer, connect it to PRE OUT SW1. SN 29400897 * 2 9 4 0 0 8 9 7 * - 2 - (C) Copyright 2011 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved.
■ When using a TV that supports Audio Return AUDIO Channel, both audio/ The Onkyo Universal Port Options are sold separately and their availability depend on the region. DIGITAL HDMI video signals from the AV OPTICAL receiver and the audio...
Page 3
4. Connecting to the Network (Optional) 6. Using the Automatic Speaker Setup (Optional) ® The following diagram shows how you can connect the AV receiver to your home network. In this example, it’s connected to a LAN To create a listening environment in your home theater that all listeners will enjoy, Audyssey MultEQ XT32 takes measurements port on a router, which has a 4-port 100Base-TX switch built-in.
(Other models) If you can't resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo dealer. To reset the AV receiver to its factory defaults, turn it on and, while holding down VCR/DVR, press 8 ON/STANDBY. “Clear” will appear on the display and the AV receiver will enter standby mode.
Need help?
Do you have a question about the TX-NR3009 and is the answer not in the manual?
Questions and answers