Table of Contents
Advertisement
Quick Links
Rugged VoIP Handset Telephones
Confidentiality Notice .....................................................................................................................1
Product Overview ............................................................................................................................1
System Requirements and Limitations ................................................................................................. 2
Tips for VoIP Subscribers ...................................................................................................................... 2
Features and Functions .......................................................................................................................... 2
Operation .........................................................................................................................................2
Placing a Call ........................................................................................................................................... 2
Receiving a Call ....................................................................................................................................... 3
Monitoring and Reporting ..................................................................................................................... 3
Installation ......................................................................................................................................3
Safety Guidelines ..................................................................................................................................... 4
Security Hardware .................................................................................................................................. 4
Conduit Installation Details (Applicable to Models 246-700 and 256-700) ........................................ 4
Models 210-700BH and 210-700BHAC ................................................................................................. 5
Model 226-700 ......................................................................................................................................... 7
Model 246-700 ......................................................................................................................................... 8
Model 256-700 ....................................................................................................................................... 10
Model 276-700 ....................................................................................................................................... 12
Models 276-700BH and 276-700BHAC ............................................................................................... 14
Field Wiring ..................................................................................................................................16
Power ...................................................................................................................................................... 16
Power-Over-Ethernet .......................................................................................................................... 16
Local Power ........................................................................................................................................ 16
Network .................................................................................................................................................. 16
Auxiliary I/O.......................................................................................................................................... 18
Inputs................................................................................................................................................... 18
Outputs ................................................................................................................................................ 18
Recommended Cabling ......................................................................................................................... 18
Setup ..............................................................................................................................................19
VoIP Telephone Input Contacts .......................................................................................................... 19
VoIP Telephone Output Contacts ....................................................................................................... 19
GAI-Tronics Corporation 3030 Kutztown Road Reading, PA 19605 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
V
ISIT WWW
G A I - T R O N I C S
A H U B B E L L C O M P A N Y
T
A B L E O F
.
-
.
GAI
TRONICS
COM FOR PRODUCT LITERATURE AND MANUALS
®
C
O N T E N T S
Pub. 42004-445K
Advertisement
Table of Contents
Related Manuals for GAI-Tronics 210-700BH
Summary of Contents for GAI-Tronics 210-700BH
-
Page 1: Table Of Contents
Models 276-700BH and 276-700BHAC ....................14 Field Wiring ..........................16 Power ..............................16 Power-Over-Ethernet .......................... 16 Local Power ............................16 Ground (For Models 210-700BH/-700BHAC, 226-700, 276-700/-700BH/-700BHAC Only) ..16 Network ..............................16 Auxiliary I/O............................18 Inputs..............................18 Outputs ..............................18 Recommended Cabling ......................... 18 Setup ..............................19... - Page 2 Handset Audio ............................25 Inputs ..............................25 Outputs ..............................25 Indicators ............................... 25 Mechanical ............................. 25 Approvals ............................27 GAI-Tronics Corporation 3030 Kutztown Road Reading, PA 19605 USA 610-777-1374 800-492-1212 Fax: 610-796-5954 ISIT WWW TRONICS COM FOR PRODUCT LITERATURE AND MANUALS...
-
Page 3: Confidentiality Notice
GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. -
Page 4: System Requirements And Limitations
Pub. 42004-445K Rugged VoIP Handset Telephones Page 2 of 27 System Requirements and Limitations The VoIP telephones require Power-over-Ethernet (PoE) or a local 24–48 V dc power source for operation. Two VoIP telephones can be connected in a peer-to-peer configuration without the need for a LAN. -
Page 5: Receiving A Call
Pub. 42004-445K Rugged VoIP Handset Telephones Page 3 of 27 Receiving a Call When a VoIP telephone is called, the telephone’s ringer will sound until the handset is removed from the cradle (taken off-hook) and a conversation can take place. Monitoring and Reporting Each telephone can recognize and generate several hardware and configuration fault condition alarms. -
Page 6: Safety Guidelines
Models 210-700BH/-700BHAC, 226-700 and 276-700/-700BH/-700BHAC are vandal-resistant, with the front panel for each telephone attached to its enclosure with security screws. A GAI-Tronics Model 233- 001 Security Screwdriver or Torx T-25 security head tip (sold separately) is recommended for installing the security screws. -
Page 7: Models 210-700Bh And 210-700Bhac
(NOT RECOMMENDED) Models 210-700BH and 210-700BHAC The mounting and cabling instructions for the Model 210-700BH/-700BHAC Telephones are as follows: Figure 3. Models 210-700BH/-700BHAC VoIP Behavioral Telephones Outline and Mounting Detail P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-445K.docx... - Page 8 6. Replace the front cover assembly and fasten using the four security screws removed in Step 1. Tighten the four screws using a GAI-Tronics No. 233-001 Security Screwdriver. 7. Verify operation by calling to and from another telephone. Verify operation of peripheral equipment.
-
Page 9: Model 226-700
Model 226-700 The mounting and cabling instructions for the Model 226-700 Telephone are as follows: 1. Remove the eight security screws from the front panel using a GAI-Tronics No. 233-001Security Screwdriver. Remove the front panel and set it aside. 2. There are eight mounting holes in the back of the enclosure in two 4-hole patterns. -
Page 10: Model 246-700
Pub. 42004-445K Rugged VoIP Handset Telephones Page 8 of 27 8. Seal the conduit entry point(s). 9. Perform the initial programming of the telephone. Refer to the Programming section beginning on Page 20. 10. Verify operation by calling to and from another telephone. Verify operation of peripheral equipment. - Page 11 Pub. 42004-445K Rugged VoIP Handset Telephones Page 9 of 27 6. Perform the initial programming of the telephone (refer to the Programming section beginning on Page 20). 7. Verify operation by calling to and from another telephone. Verify operation of peripheral equipment. 8.
-
Page 12: Model 256-700
Pub. 42004-445K Rugged VoIP Handset Telephones Page 10 of 27 Model 256-700 The mounting and cabling instructions for the Model 256-700 Telephones are as follows: 1. Open the front door and remove the four outer screws from the mid-section. Carefully pull the enclosure apart until encountering a slight resistance on the left side. - Page 13 Pub. 42004-445K Rugged VoIP Handset Telephones Page 11 of 27 Figure 12. Model 256-700 Mounting Detail P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-445K.docx 06/18...
-
Page 14: Model 276-700
1. Use the supplied back box to mount the Model 276-700 VoIP Telephone in flush-mount applications or in a GAI-Tronics Model 234 Series Stanchion. Mount the back box to the structure using the appropriate hardware. Refer to Figure 14 for cutout dimensions. - Page 15 Pub. 42004-445K Rugged VoIP Handset Telephones Page 13 of 27 Figure 14. Model 276-700 Mounting Detail P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-445K.docx 06/18...
-
Page 16: Models 276-700Bh And 276-700Bhac
1. Remove the four screws securing the dust cover to the front cover and remove the dust cover. OTES When installing a Model 276-700BH/-700BHAC VoIP telephone in a GAI-Tronics Model 238- 001FS Surface-Mount Enclosure, the front panel assembly mounts directly to the enclosure (the dust cover is not required.) ... - Page 17 Pub. 42004-445K Rugged VoIP Handset Telephones Page 15 of 27 Figure 16. Models 276-700BH/-700BHAC Dust Cover Detail Figure 17. Models 276-700BH/-700BHAC Mounting Detail P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-445K.docx 06/18...
-
Page 18: Field Wiring
(−) Negative Ground (For Models 210-700BH/-700BHAC, 226-700, 276-700/-700BH/-700BHAC Only) The enclosure must be connected to earth ground. Install a #6 ring lug on the ground conductor and secure it to the ground terminal located in the rear of the front panel. - Page 19 Pub. 42004-445K Rugged VoIP Handset Telephones Page 17 of 27 Figure 18. VoIP Telephone PCB Assembly P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-445K.docx 06/18...
-
Page 20: Auxiliary I/O
Pub. 42004-445K Rugged VoIP Handset Telephones Page 18 of 27 Auxiliary I/O Inputs Four auxiliary inputs have been provided for customer use. Terminations for these inputs are provided on terminal block P12. Table 2. Auxiliary Inputs—P12 Label Function Input 4 Common Input 3 Common... -
Page 21: Setup
Pub. 42004-445K Rugged VoIP Handset Telephones Page 19 of 27 Setup VoIP Telephone Input Contacts Each VoIP telephone accepts four volt-free inputs. Refer to the Specifications section of this manual for the input ratings. The function of each input is configurable. Inputs can be configured for one of the following modes: On, Off, or On/Off. -
Page 22: Programming
The installer should ensure that the network is configured to allow VoIP communications (using the SIP protocol) between the desired locations before attempting to configure a GAI-Tronics VoIP Telephone. The general sequence for set up of a VoIP telephone is as follows: VoIP PCBA Setup The PC must be connected to the same network as the VoIP telephone. -
Page 23: Preventive Maintenance For Model 276-700/-700Bh/-700Bhac
If your telephone requires depot service, contact your Regional Service Center for a return authorization number (RA#). Equipment should be shipped prepaid to GAI-Tronics with a return authorization number and a purchase order number. If the equipment is under warranty, repairs will be made without charge. -
Page 24: Troubleshooting
Pub. 42004-445K Rugged VoIP Handset Telephones Page 22 of 27 Troubleshooting Table 5. Troubleshooting Chart Problem Possible Solution If the volume is low, increase the volume level in the telephone’s Low volume programming configuration. If the volume is high, decrease the volume level in the telephone’s High volume programming configuration. -
Page 25: Replacement Parts And Accessories
Pub. 42004-445K Rugged VoIP Handset Telephones Page 23 of 27 Replacement Parts and Accessories Table 6. Replacement Parts by Model Number Part No. Description 12565-701 VoIP Carrier PCBA Replacement Kit ... -
Page 26: Specifications
Pub. 42004-445K Rugged VoIP Handset Telephones Page 24 of 27 Table 7. Available Accessories by Model Number Part No. Description Pole Mounting Kit, Rugged Phone/RF 230-001 Call Box Pole Mounting Kit for BH/FS Series 231-001FS Telephones when installed in a Model 238-001FS Enclosure Pole Mounting Kit for Model 246-700 ... -
Page 27: Handset Audio
Dimensions ............10.00 H × 5.50 W × 3.27 D in (254 × 139.7 × 83.1 mm) Weight ............................5.5 lb (2.5 kg) Handset/cord 210-700BH .................. G-style with 12-inch armored cord 210-700BHAC ................G-style with 15-inch armored cord Dial pad ..........................chrome-plated zinc... - Page 28 Pub. 42004-445K Rugged VoIP Handset Telephones Page 26 of 27 Model 246-700 Construction ....................... engineered plastic enclosure ® Handset/cord ............Hytrel cord (6-foot) with noise-canceling microphone Braille dial pad ........................chrome-plated zinc Dimensions ............9.50 H × 8.00 W × 6.90 D in (241.3 × 203.2 × 175.3 mm) Mounting ......................
-
Page 29: Approvals
Pub. 42004-445K Rugged VoIP Handset Telephones Page 27 of 27 Approvals Models All: Compliance to Standard ....................FCC CFR 47 Part 15 Models 226, 246, 256, 276: Safety of Information Technology Equipment ..............UL/CSA 60950 Models 226, 256, and 276 only: Enclosure for Electrical Equipment .................... - Page 30 Warranty Equipment. GAI-Tronics warrants for a period of one (1) year from the date of shipment, that any GAI-Tronics equipment supplied hereunder shall be free of defects in material and workmanship, shall comply with the then-current product specifications and product literature, and if applicable, shall be fit for the purpose specified in the agreed-upon quotation or proposal document.
Need help?
Do you have a question about the 210-700BH and is the answer not in the manual?
Questions and answers