Daewoo DAT1200EM User Manual page 9

• When ever approaching an operator of the machine, carefully call his
attention and confirm that the operator stop the engine. Be careful
not to startle or distract the operator which can cause an unsafe
situation.
• Never touch the nylon cutting head or blade when ever the engine is
running. If it is necessary to replace the protector or cutting attach-
ment, be sure to stop the engine and confirm that the cutting device
has stopped running.
• The machine should be unplug when the it is moved between work
areas.
• Be careful not to hit the nylon cutting head against stones, or the
ground. Unreasonable rough operation will shorten the life of the ma-
chine as well as create an unsafe environment for yourself and those
around you.
• Pay attention to loosening and overheating of parts. If there is any
abnormality of the machine, stop operation immediately and check
the machine carefully. If necessary, have the machine serviced by a
authorized dealer. Never continue to operate a machine which may
be malfunctioning.
• Pay special attention NOT to operation in the rain or just after the rain
as the ground may be slippery.
• If you slip or fall to the ground or into a hole, release the trigger im-
mediately.
• Be careful not to drop the machine or hit it against obstacles.
• Before proceeding to adjust or repair the machine, be sure to stop
the engine and keep the machine unplug.
• Make periodic inspections to assure safe and efficient operation. For
a thorough inspection of your machine, please contact a dealer.
• It is believed that a condition called Raynaud's phenomenon, which
affects the fingers of certain individuals may be brought about by
exposure to vibration and cold. loss of color and numbness in the fin-
gers. The following precautions are strongly recommended because
the minimum exposure which might trigger the ailment is unknown.
9