Related Manuals for Daewoo DHT260
Summary of Contents for Daewoo DHT260
- Page 1 DHT260 Gasoline hedge trimmer USER'S MANUAL www.daewoopowerproducts.com Manufactured under license of Daewoo International Corporation, Korea...
-
Page 2: Table Of Contents
INDEX 1. INTRODUCTION ............................4 2. SUPPLY INCLUDES ..........................4 3. TECHNICAL SPECIFICATIONS ....................... 4 4. GENERAL SAFETY INSTRUCTIONS ...................... 5 5. PUTTING THE APPLIANCE INTO OPERATION ..................8 6. OPERATION ............................. 8 7. OPERATOR REQUIREMENTS ......................11 8. ENGINE REPAIR / FAILURES ........................ 12 WARRANTY ............................... - Page 4 180°...
-
Page 5: Introduction
1. INTRODUCTION To enjoy your new appliance as long as possible, please read carefully the Operating Instructions and the attached safety instructions before putting the appliance into operation. We also recom- mend keeping the Operating Instructions for future reference. Making technical changes to improve the appliance as part of the continuous product development reserved. -
Page 6: General Safety Instructions
* Noise information Measured values identified in accordance with 2000/14/EG (1.60m height, 1m distance) –measure- ment tolerance +-3dB 4. GENERAL SAFETY INSTRUCTIONS Please read carefully the Operating Instructions before using the appliance for the first time. If there are any doubts regarding the appliance connection and operation, please contact the manufacturer (service department). - Page 7 lled properly? Are all other conditions for perfect working satisfied? Any damaged protection equip- ment, etc. must be properly repaired or replaced by authorised persons, unless explicitly provided otherwise in the Operating Instructions. Any defective switches must be replaced by an authorised service centre.
- Page 8 Long using of a motor appliance may lead to blood circulation disorders as a result of vibra- tions. However, the time of using the appliance may be prolonged by wearing appropriate gloves or taking regular breaks. Be sure to know that person dispositions to poor blood circulation, low outsi- de temperatures and big pressure on the appliance when working make the time of using the appliance shorter.
-
Page 9: Putting The Appliance Into Operation
When trimming wood that has been treated or processed before, attention should especially be paid to nails, bolts, etc. Remove any undesirable items before working. Before starting the hedge trimmer, make sure the shearing knife is properly fitted and movable parts of the appliance are not obstructed. - Page 10 • Side areas should first be trimmed bottom-up. The upper edge should be trimmed straight as you wish to give a roof or rounded shape. In doing so, both sides of the knife must be used. • If the knife is blocked by solid items, the appliance must be switched off immediately and the jammed item released subsequently.
- Page 11 Other risks Slipping, tripping or falling of persons When reversing, you might trip and the appliance can capture your legs. Move the appliance forward only. Marking: PRODUCT SAFETY: ENVIRONMENT PROTECTION: Product corresponds to Packing cardboard Dispose waste professionally appropriate EU standards material may be delivered so as not to harm the and directives...
-
Page 12: Operator Requirements
Behaviour in case of emergency First aid kit must always be available in the place of your work in case of accident in accordance with DIN 13164. Material taken out of the first aid kit needs to be supplemented right away. If help is needed, please provide the following details: Place of accident Accident nature... -
Page 13: Engine Repair / Failures
Check the following before starting any work: • Hand throttle • Appliance completeness • Jaw or shearing knife fitting • Sharpening condition • Guide bar for any wear or damage Check the following after finishing your work: Appliance completeness – clean it. Check and treat regularly the following: •... - Page 14 1. Tank is empty. 1. Full tank to be filled up. 2. Engine is flooded. 2. Ease up on the gas, start a couple of times, remove the spark plug if necessary, clean and dry it. 3. Spark plug is dirty (carbon remains on electrodes).
-
Page 15: Warranty
WARRANTY CARD Product model Date of sale Company Serial number Client's signature Username The product is in good conditions and fully complete. Read and agree the terms of the warranty. GUARANTEE The warranty period starts from the date of sale of the products and covers 1 year for all power products. During the warranty period, free failures caused due to the use of poor-quality materials in the production and manufacturer workmanship admitted fault are removed. - Page 16 Manufactured under license of Daewoo International Corporation, Korea...
Need help?
Do you have a question about the DHT260 and is the answer not in the manual?
Questions and answers