Correlation Between Enclosure Labels And Spools - Panduit FlexCore FOBKF M1 Series Installation Instructions Manual

FlexCore
© Panduit Corp. 2021

1. Correlation between Enclosure Labels and Spools

•
FlexCoreTM Front Access Optical Distribution Frame offers the end user 6 Pack Spool Kits (Part
Number: FDUSP6 - FS199) to guide end users on how to properly route patchcords within system
•
Each FDUSP6 comes with 6 pre-labelled spools and enough labels for 11 enclosures.
•
Panduit installation instruction FS199 will show where, and how to effectively adhere labels to spools
and enclosures
•
The matching color and number between spool and enclosure will tell end users to which spool the
patchcords exiting each enclosure must be routed
•
The spools and enclosures will be labelled from the top of the frame going down
•
Up to 11 enclosures can be used in each frame
•
Each spool can handle patchcords from (2) enclosures
•
If less than 11 enclosures are used per frame, the corresponding spools can be removed from the
system
•
All future routing diagram show correct labelling of spools, and 11 enclosures per frame
Enclosure(s)
st nd
1 and 2 from top of frame
rd th
3 and 4 from top of frame
th th
5 and 6 from top of frame
th th
7 and 8 from top of frame
For Technical Support: www.panduit.com/resources/install_maintain.asp
FORM: H2-2642C
TM
Front Access Optical Distribution Frame Patchcord Routing Guide
Enclosure Label
(not to scale)
DATE: 01JAN18
Going to
Spool
1
2
3
4
Page 2 of 17
APPR:TSB REF PROC:. H1-1954
FS204
Spool Label
(not to scale)