Spool Positioning On 300Mm Vertical Cable Manager - Panduit FlexCore FOBKF M1 Series Installation Instructions Manual

FlexCore
© Panduit Corp. 2021

6. Spool Positioning on 300mm Vertical Cable Manager

•
FlexCore TM Front Access Optical Distribution Frame offers flexibility for where to install the ODF Fiber
Spool (Panduit Part #: FDUSP) using a repeated pattern of keyholes located on the 300mm vertical
cable manager
•
Installation Instruction(s) FS198 and FS199 describe how to properly install the spool into the provided
keyholes
•
If less than 11 enclosures are used, Panduit suggests installation should start from the top enclosure
and work down, without skipping any spools or RU space on the frame to plan properly for moves, adds,
and changes
•
Below are optimal spools locations for all applications discussed previously
6.1. Single Frame Cross Connect – Right Side
Amount of enclosures on frame: 11
Location of 300mm vertical cable manager(s): Right Side of Frame
Patchcords being routed out of system (ex. Overhead): No
•
Valid for 2 single frames, back to back option as well
Vertical Cable Manager(s) with Spools
For Technical Support: www.panduit.com/resources/install_maintain.asp
FORM: H2-2642C
TM
Front Access Optical Distribution Frame Patchcord Routing Guide
Installed
DATE: 01JAN18
Spool Mounting Keyholes to use on
Vertical Cable Manager(s)
Page 13 of 17
APPR:TSB REF PROC:. H1-1954
FS204