Product Profile; Introduction; Features Highlights; Installing The Aircraft - dji PHANTOM 4 ADVANCED User Manual

Product Profile

Introduction

The DJI Phantom 4 Advanced / Advanced+ is an extremely smart flying camera able to intelligently avoid
obstacles during flight. Its brand new camera offers unprecedentedly image quality for the Phantom, with
greater clarity, lower noise, higher resolution photos and videos.

Features Highlights

Upgraded TapFly TM and ActiveTrack
vanced+ flies anywhere visible on-screen with a tap and tracks moving subjects effortlessly.
Camera and Gimbal: The Phantom 4 Advanced / Advanced+, shoots at 4K at up to 60 frames per sec-
ond and captures 20 megapixel photos that look crisper and cleaner than ever thanks to the new 1-inch
CMOS sensor. Its mechanical shutter and auto focus create an even better aerial shooting experience.
Flight Controller: The flight controller has been updated to provide a safer, more reliable flight experience.
A new flight recorder stores critical data from each flight. A system of visual sensors enhance hovering
precision when flying indoors or in environments where GPS is unavailable. Dual IMUs and compasses
design provides redundancy.
HD Video Downlink: The low-latency long range (up to 4.3mi (7km)) HD downlink is powered by an en-
hanced version of DJI LIGHTBRIDGE
Remote Controller: The Phantom 4 Advanced+ remote controller includes a 5.5 inch high luminance
monitor with integrated DJI GO for full control.
Intelligent Flight Battery: The new 5870 mAh DJI Intelligent Flight Battery features upgraded battery cells
and an advanced power management system to provide up to 30 minutes* of flight.

Installing the Aircraft

Preparing the Aircraft
1. Remove the gimbal clamp from the camera as shown below:
*At sea level in calm environments when flying in ATTI mode, The flight time will vary due to different flight
patterns, weather conditions and altitudes.
6
©
2017 DJI All Rights Reserved.
TM commands in the DJI GO 4 app, the Phantom 4 Advanced / Ad-
.
TM