Crusader 5.0L MPI Instruction Manual page 78

OUT-OF-SEASON STORAGE - 13
RECOMMISSIONING AFTER STORAGE
8. Open the fuel shut-off valve (if equipped).
9. Refer to the OPERATING INSTRUCTIONS
section and perform all the safety checks
before starting the engine.
10. Refer to the Engine Maintenance section
and perform the Priming the Fuel System
instructions.
CAUTION
If the engine(s) is (are) to be started prior to
launching, use the procedure FLUSHING COOLING
SYSTEM before proceeding to start the engine(s).
11. Open the seacock before starting the engine.
12. Start the engine and closely observe the
instrument panel. Allow the engine to reach
normal operating temperature. Inspect the
engine carefully for fuel, exhaust, oil and
water leaks.
13. Check the steering, shift and throttle controls
for proper operation.
76 L510001-13