25-Hour Engine Inspection - Crusader 5.0L MPI Instruction Manual

Table of Contents

Advertisement

After the fi rst 25 hours of operation, it is recommended
that the engine be given an inspection. Your boat
dealer or a Crusader Premier servicing dealer should
be contacted to perform the necessary checks and
adjustments to ensure the proper engine performance.
The following maintenance should be performed:
Change the engine oil and fi lter.
• Check and clean the primary fuel fi lter.
Check the engine alignment.
• Inspect the accessory drive belt(s) and check the
tension.
Check all the fl uid levels.
• Check the throttle and the shift cable adjustments
and check for freedom of movement.
• Cooling System - Inspect all the hoses for leaks,
damage and deterioration. Check all the hose
clamps for adequate tightness.
• Exhaust System - Inspect the entire exhaust
system for leaks, damage and deterioration.
Check all the hose clamps for adequate
tightness.
• Battery - Check the electrolyte level and specifi c
gravity. Inspect the case for damage. Check the
battery cables and connections.
• Engine Assembly - Check for loose, missing
or damaged parts. Pay close attention to
engine mounts, starter and alternator mounting
fasteners.
NOTICE: Crusader Marine Engines assumes no
responsibility for the costs related to the 25-hour
inspection. This is the owner's responsibility.

25-HOUR ENGINE INSPECTION - 8

L510001-13
37

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5.0L MPI and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

5.7l mpi6.0l mpi6.0l mpi ces

Table of Contents