Crusader 5.0L MPI Instruction Manual page 16

SERVICE and WARRANTY - 1
8. To insure prompt repair under this Warranty, Crusader will maintain a supply of warranted parts suffi cient to
meet the expected demand for such parts. Any replacement part may be used in the performance of any
warranty maintenance or repairs and will be provided by Crusader without charge to the owner.
9. Parts covered under this Warranty are:
1. Fuel Metering System
A. Fuel Injectors
B. Fuel Pressure Regulator
C. Manifold Absolute Pressure Sensor
D. Throttle Position Sensor
E. Throttle Body - Port Fuel Injection Models
F. Coolant Temperature Sensor
G. Intake Valves
H. Oxygen Sensors
2. Air Induction System
A. Intake Manifold
B. Air Filter (Flame Arrestor)
3. Ignition System
A. Spark Plugs
B. Electronic Ignition System
C. Ignition Coil and/or Control Module
D. Ignition Wires
10. Exclusions: The repair or replacement of any warranted part otherwise eligible for coverage under this
Warranty may be excluded from such warranty coverage if Crusader demonstrates that the engine and/or
part has been abused, neglected, or improperly maintained, and that such abuse, neglect, or improper
maintenance was the direct cause of the need for repair or replacement of the part.
11. Crusader original equipment parts are "identical in all material respects to that part as described in the
engine manufacturer's application for certifi cation". The use of any replacement parts not supplied by
Crusader may not meet this requirement and will be grounds for disallowing a claim made under this
Warranty. Crusader will not be liable under this Warranty or provide warranty coverage for product failures
caused by parts other than Crusader original equipment parts.
12. If you have any questions regarding your warranty rights and responsibilities, or the location of Crusader
warranty stations near you, you should contact Crusader at 1-803-345-0050.
14
4. Lubrication System
A. Oil Pump and Internal Parts
5. Positive Crankcase Ventilation (PVC) System
A. PCV Valve
B. Oil Filler Cap
6. Exhaust System
A. Exhaust Manifold(s)
B. Exhaust Riser(s)
C. Exhaust Valves
D. Catalytic Converters
7. Miscellaneous Items Used on Above Systems
A. Hoses, clamps, fi ttings, tubing, sealing
gaskets or devices and mounting hardware
B. Electronic Controls
C. Electronic Control Module
D. Pulleys, belts and idlers
L510001-13