Energy Saver Mode - Futech LINE LASER LL4200 User Manual

· Press a third time: Both laser lines will be on.
LL4200 - LL4205
LL5505
To turn off the laser device, hold the On/off button – Laser line
chooser [01] for about 2 seconds until all laser lines will be
switched off.

ENERGY SAVER MODE

In both modes, self-levelling and locked mode, press the Energy
saver - Receiver button [02] shortly to adjust the brightness of
the laser lines.
The brightness is divided into 4 levels and the key cycles
through them. Lower intensities allow your battery to last longer.
RECEIVER MODE (PULSE)
Only in self-levelling mode, hold the Energy saver - Receiver
button [02] for about 2 seconds. The receiver mode is now
turned on. This means the laser lines can now be detected by a
laser receiver.
Hold the Energy saver - Receiver button [02] again for about 2
seconds to turn off the receiver mode.
...
In this mode, energy saving is unavailable.
...
5