Advertisement
Quick Links
Advertisement
Related Manuals for TRONXY X3
Summary of Contents for TRONXY X3
- Page 1 Tronxy 3D Printer Operating Instruction...
-
Page 2: Preparatory Work
Preparatory Work Turn on the power after micro SD card insert, then you can control the machine using key-press and the LCD display, as picture below: Micro SD card slot is at the back of the Plug in adaptor after Micro electronic box, near the USB Interfaces. - Page 3 Loading & Unloading PLA Loading PLA : 1, Press menu button, Straighten select ‘Preheat PLA’, one end of then Right key to confirm. filament 2, Take the filament and then straighten one end after Temp. up to 190 degrees. 3, Press the extrution clip , feed the filament Feed the into the hole.
- Page 4 Level Instruction In order to better printing , we also need to level the print bed or the filament may not adhere to the bed that result in poor printing quality and can not print. Please clean the nozzle to make sure there are no remained material before leveling.
-
Page 5: Off-Line Printing
Off-line Printing Operate the printer with the key-press and LCD screen after print bed is leveled, as shown below: You will see the ‘monitoring interface’ first after power on Press menu button go into ‘menu screen’. Press Down key after into menu, then you will see ‘SD card’...
Need help?
Do you have a question about the X3 and is the answer not in the manual?
Questions and answers